How to choose the right size cabinet pulls – tips & tricks

When it comes to how to Choose the Right Size Cabinet Pulls? There are many things to consider. The size of the pulls is one thing that you may not think about this. Make sure to consider the length of the cabinet pull when Choosing a Cabinet Pull. There are several factors you need to consider when choosing a cabinet pull.

 

The best way to choose the right size cabinet pulls for your home


 There’s a lot of information out there about what’s suitable for your home. You’re likely to go through various options and surveys to find the right size cabinet pulls. But do you know how to choose the correct size? A wrong size can lead to problems with the pull itself, so it’s essential to ensure that you have the correct size when you get it. Here, we will show you how to choose the right size cabinet pulls for your home without damage.

 You might be wondering what the difference between pullers and cabinet pulls is. Both pullers and cabinet pullers use a pulling motion to get the desired size. You can also use two kinds of pullers and cabinet pullers in the same room if you have enough space.

If you’re redesigning your kitchen or planning a new build, you may be wondering just how big of a difference the perfect pulls can make on cabinetry! 

Here’s what we recommend:

– For cabinets with 15” deep drawers, use a 3¼” H x 7/8” W pull.

– For cabinets with 24” deep drawers, use a 4¼” H x 1¾” W pull.

– For cabinets with 30” deep drawers, use a 5½” H x 2¾” W pull.

 

How to choose the right size cabinet pulls

 

What is the difference between a puller and a cabinet puller? 

 Pullers are designed to remove cups, spouts, and other parts from metal cabinets without damaging the cabinet. Cabinet pullers are designed to remove screws from metal cabinets.

 Pullers are used to remove items from a cabinet. Cabinet pullers are used to connect the two sides of a cabinet.

When it comes to pulling clothes from a closet or wardrobe, there is a big difference between a puller and a cabinet puller. A cabinet puller is specifically designed for pulling clothes from a cabinet. It has a long handle and a removable wheel that makes it easy to move the clothes around. On the other hand, a puller is designed for pulling clothes from a drawer or closet. It has a short handle and doesn’t have a wheel. Instead, it relies on its strength to move the clothes.

How to use two different types of cabinet pulls in the same room?

 When you’re designing your home, it can be helpful to have different pulls for different areas of your home. This way, you can hide or show other parts of your home without having to change the cabinet pulls in every room. For example, you might use a pull to conceal the door handle on the left side of your home while utilizing a cabinet pull to show the door handle on the right side. This way, you can create an efficient and organized space without rearranging everything.

It can be challenging to know where to start when using two different cabinet pulls in the same room. Which one should go in the kitchen and which one should go in the bedroom? What about the door handles? How do you choose which ones to use? In this blog post, we’ll take a look at how to use two different types of cabinet pulls in the same room and learn some tips for improving your home design.

Which type of cabinet pulls is best for your style? 

Cabinet pulls are one of the most commonly used interior design items. They can be used for decoration, securing, and moving furniture. Various cabinet pulls available in the market vary in size and material.

Cabinet pulls can be made from many materials like metal, wood, and plastic. The type of material will determine the price and how easy it is to install.

There are two types of cabinet pulls pull-out or retractable drawer pull, which is found on drawers or drawers pulled out from cabinets, and handle-pull cabinet pulls, which have a handle attached to each one.

        • BAR PULLS

A bar pull can be used on both front and back doors, while a cabinet pull may only operate on a back door. It has a long bar attached to the cabinet by one or two points. It’s used as a handle to open a cabinet door or drawer. Bar pulls are also straightforward to install and can adjust to fit almost any door. It’s is crucial because you want the bar pull off acting on the back of your cabinet door, not the front. When installing a bar pull, ensure that it’s installed correctly. So it won’t interfere with any other hardware in your cabinet.

If one particular type of bar pull doesn’t work well for you, you may want to try another brand or style to see if it is better suited for your needs.

        • CUP PULLS 

 These are typically used most often on drawers because of how they function. They are most used on cabinets that pull straight out. It’s is a popular option for many traditional and modern spaces, with a wide array of choices available to fit many different styles.

Cup pulls are a popular choice for everyone. It s great to use on drawers because they also add some style to your home besides serving a functional purpose. This design is available in many different styles and colors, but they usually are made out of stainless steel and black plastic.

        • FINGER PULLS 

Finger pulls are a popular way to add style and elegance to a kitchen or dining room. They are often seen in kitchens with European flat panel cabinets.

There’s nothing more functional than finger pulls because they allow you to carry containers inside the cabinet without having them fall out of the way. Finger pulls are so helpful that it’s easy to forget these attractive touches exist! As a bonus, they tend to look great in any cabinetry, even if it has traditional pull handles.

        • APPLIANCE PULLS 

Appliance pulls can act as a decorative element and add personality to your space. It’s a larger version of bar pulls than other cabinet pulls. 

It can use on a range hood or even an oven hood if you want that extra punch of style in your home instead of utility like water lines, strainers, and water filters.

They offer great versatility for decorating the kitchen space because they blend into any room without taking away from the overall design scheme.

 

How to Measure the Size of Your Cabinet Pulls:

To determine how large of a cabinet pull you’ll need, you’ll first need to know the size of your wardrobe. For example, if you have a 12” wide cabinet that is 18” deep, then your width is 12,” and your depth is 18”.

You can figure out how long the pull needs to be by following these instructions:

1.) Measure the depth (18”) and divide by 1/3 (6”). It means that the pull needs to be 6” long or more.

2.) Measure the width (12”) and divide by 1/5 (2”). It means that the pull needs to be 2 ½” long or less.

If you’re using a cabinet pull, measure the diameter (approximately one inch) and make sure it’s at least 1/5 of your drawer’s width.

 

3 inches

96mm (about 3 3/4 inches)

128mm (about 5 inches)

160mm (about 6 1/4 inches)

256mm (about 10 inches)

Cup Pulls are another option that is typically 3 inches or 4 inches.

Tips for determining cabinet pull length:

Most importantly, it would be best to look at the overall length when choosing cabinet hardware pulls.

 

Here is some basic terminology to get yourself familiar with what to pay attention to when reading the product specifications online:

 

Center-to-Center– To make sure that screws do not interfere with each other, it’s best to use a 1/2-inch drill bit for this operation. Screws should be spaced at roughly 1.5 cm (1/2 inch) apart for safety reasons. It’s is the standard industry measurement for sizing cabinet handles.

Overall length– The distance of one end from the other end of the cabinet pulls. This measurement is always more significant than the “center to center” measurement.

Projection – measures how far the pull or knob sticks out from the surface of the cabinet door or drawer after it is installed.

Diameter– self-explanatory in a round knob, but the diameter of a pull or handle, if given, refers to the width or thickness of the bar portion of the cabinet pull (the part you grab).

The overall length typically will not be more than 2 inches greater than the center to center measurement.

Take the pull off the cabinet and run painter’s tape between both holes

Record the measurement in inches (if you are in the US). Use an online calculation to convert to metric.

Measure the distance from the top of the cabinet to the bottom. Use that measurement in inches. If currently, your pull is too short, use a calculator to determine how much longer you need to use it.

Deciding on How to Choose the Right Size Cabinet Pulls down to just a few questions:

Do you want the cabinet hardware to be the most prominent feature on the cabinet drawers or doors?

Are you going for a more streamlined modern look?

Is your style more traditional, and do you want the hardware to be more functional than decorative?

My advice since I can’t design your hardware layout for you is this:

 

Mix up knobs and different lengths of pulls to provide visual interest.

All bar pulls are an excellent option if you want a more modern look because there are so many finishes and lengths.

Install pulls in some of those locations to modify a kitchen that currently has all knobs – that’s what I’ve done.

Tips that Help to Choose the Right Size Cabinet :

How to choose the right size cabinet pullsWhen selecting the kitchen cabinet hardware, people often do not realize that the size of the hardware matters a lot. It is also one of the significant aspects that must be kept in mind while purchasing.

If you’re looking for high-end woodworking machinery for your kitchen, then you need to work with a well-reputed vendor and make sure that you get an expert installation team. Selecting cabinet pulls is a bit more complicated.

Selecting the correct type of hardware is not as easy as in other areas such as chairs or tables. You have to think carefully about different kinds of hardware like pulls, knobs, or both. The task can be made more accessible by following some tips and tricks below to help you choose the right ones.

When choosing the perfect size for your cabinet pulls, you need to some considerations:

1) Size:

It all depends on what you will use them. So instead of choosing one size that would fit all your needs, it’s better if you choose one that would do most but not all (to ensure no problem at all).

For example, if you are going to use them mostly for cupboards and drawers, go with pull handle holders that are only 3” – 5”. If, however, you want them to hold doors or cabinets, for instance (a little bigger than 3” – 5”), then go with knobs instead.

2) Material type:

Wood is a popular choice for cabinet pulls because it’s durable and easy to work without any problem. Metal is also a popular choice for wardrobe pulls because it’s strong and long-lasting. It can be challenging to find the right material type for your cabinet pull, so it’s essential to make sure you choose the right one.

 

Wood Cabinet Pulls: Wood is a good choice for cabinet pulls because it’s durable and easy to work. It can be challenging to find the right material type for your cabinet pull, so it’s essential to make sure you choose the right one.

 

Metal Cabinet Pulls: Metal is a good choice for cabinet pulls because it’s strong and long-lasting. It can be challenging to find the right material type for your cabinet pull, so it’s essential to make sure you choose the right one.

3) length of the pull:

The overall length of the 4-drawer cabinet, the pull, is usually 4.5 inches or 3/4 inches from the center to the edge. The overall length is no less than 2 inches greater than its center to center measurement unless specified otherwise in product specifications online.

1. 4.5-inch diameter (or 3/4 inch)

2. 5-inch diameter (or 1 inch)

3. 6-inch diameter (or one-inch)

4) Style of the pull:

There are a variety of different cabinet pull styles. However, a typical class is a curved pull. Curved pulls are designed to handle and look great in any kitchen. They’re perfect for modern kitchens with sleek design elements and exposed woodwork.

 

You can find curved pulls in various materials, including metal, plastic, and wood. However, the most popular type of curved pull is made out of nickel. This material is durable and looks excellent against any modern kitchen style.

 If you’re looking for a unique way to add some classic appeal to your cabinets, opting for a nickel-curved cabinet pull is the way to go.

The Benefits Of Using Pulls For Both The Cabinet Doors And Drawers :

 

There isn’t a right or wrong choice when using only pulls or a mixture of knobs and pulls. We often do both options for clients, and either one can look beautiful. That said, because we are talking specifically about sizes for cabinet pulls, let’s talk about some of the benefits of using pulls for both cabinet doors and drawers:

DESIGN –

Using a single style of cabinet hardware can offer a more cohesive look to the space.  

FUNCTION –

Cabinet pulls, specifically, bar pulls, are a good choice for all sizes of people, from little children to adults and even older people who may have a more challenging time grasping a small knob. For that reason, they can make it easier to open the cabinet doors for the entire family.

DUAL PURPOSE –

More extended bar and appliance pulls can sometimes serve a dual purpose, also serving as a towel bar in a bathroom.

Conclusion:

Choosing the right size cabinet pulls is a common problem that many people have to deal with in their homes. This blog post will walk you through the steps on what to do before you buy your next cabinet pull.

 

In general, it pays to check the desired types of pulls before purchasing any items. Always check the size of your cabinetry and choose the most suitable hardware finish to highlight your kitchen effectively.

 

Thank you for reading. If you find this post interesting, don’t hesitate to share it with your friends and relatives to learn more exciting tips for selecting the proper size cabinet pulls.

 

FAQ:

Most popular cabinet pull size?

The most popular cabinet pull size for standard size cabinetry (dimensions of 12″ – 36″) is 3-inch.

How many pulls should behave per drawers?

Due to the long and limited pull, lengths for sale outside of bar pulls. When you consider everything, it all comes down to personal preference of the look you would like to create.

 

 

 

1 thought on “How to choose the right size cabinet pulls – tips & tricks”

Leave a Comment